對于體育館里多見到的是膜結構看臺，為看臺做好了遮擋空間的部分，實用性很大，具備了保護措施。對比膜結構工程的技術上來看，需要注意哪些方面呢？還特講究了什么呢？小編帶大家一起來看看！

What is commonly seen in the gymnasium is the stand membrane structure, which provides shelter for the stands. It is very practical and has protection measures. From the technical point of view of membrane structure engineering, what should be paid attention to? What else did you pay special attention to? Xiaobian, let's take a look!

一：外觀設計，在設計的時候需要注意承重力和平衡，一般都是單側或者是環繞建造的方面上，須有無數個支撐點才能讓整個頂子具有強抗風、抗震的功能?？勺龊昧酥尾糠?。

1： In the appearance design, attention should be paid to the bearing capacity and balance in the design. Generally, it is one side or surrounding construction. There must be countless support points to make the whole roof have strong wind resistance and earthquake resistance. The supporting part can be completed.

二：在施工過程中，需要注意了角度和力度的搭配，以及看現場而定，一般不需要有太多的設計元素，只需要符合體育場館的要求即可，并且要保證結實耐用，在裝飾方面不是重點，看臺膜結構使用安全才是重點。

2： In the construction process, we need to pay attention to the matching of angle and strength, and it depends on the site. Generally, we don't need too many design elements, but only need to meet the requirements of stadiums and gymnasiums, and we need to ensure durability. Decoration is not the key, but the use safety of the stand membrane structure is the key.

三：還要在裁剪時量好尺寸，保證材料在焊接過程無任何影響問題，需要做好了結構部分與膜結構膜材裁剪成設計形狀部分，可在安裝成了看臺空間的基本造型。

3： In addition, the size should be measured during cutting to ensure that the materials have no impact during the welding process. It is necessary to cut the structural part and membrane structure membrane materials into the designed shape, which can be installed into the basic shape of the stand space.

此外膜結構看臺在施工時應注意不同部位采用不同規格的夾板并控制好間距，使用夾板將張拉膜結構膜體和索連接。在采用加大截面加固鋼構件的時候，對于所選擇的截面形式要有利于加固技術要求，還要考慮已經有的缺陷和損傷的狀況。

During the construction of this outer membrane structure stand, it should be noted that different parts should use different specifications of splints and control the spacing. The splints should be used to connect the membrane and cable of the tensioned membrane structure. When using enlarged section to reinforce steel members, the selected section form should be conducive to the reinforcement technical requirements, and the existing defects and damages should also be considered.

其次依據張拉膜結構安裝部位按順序進行安裝。采用多個節點整體吊裝技術，即按照張拉膜結構的膜體設計高度，將膜體按平面位置分塊吊裝，防止出現晃動現象。

Secondly, install according to the installation position of tension membrane structure. The integral hoisting technology of multiple nodes is adopted, that is, according to the design height of the membrane body of the tensioned membrane structure, the membrane body is hoisted in blocks according to the plane position to prevent shaking.

膜結構看臺安裝技術是一定以專業的廠家來進行施工，并對這工程規劃有固定施工方法，所做好了看臺膜結構的要點，并且促進看臺膜結構使用壽命更長。更多關于該產品的內容就來咨詢我們http://www.jncx.com.cn吧！

The membrane structure stand installation technology must be constructed by professional manufacturers, and there are fixed construction methods for this project. The key points of the stand membrane structure are well done, and the service life of the stand membrane structure is promoted to be longer. For more information about this product, please consult us http://www.jncx.com.cn Come on!